Repair to HDPE Reducer

OBJECTIVE

Leak seal, reach operating condition requirements as quickly as possible.

DESIGN DATA

  • Pressure 10.5 Bar
  • Temperature 35°C
  • Fuze-Dry™ Glass Fibre
  • HDPE 1.050mm diameter
  • ST3 mechanical surface preparation.

EXECUTION

  • Crew of 4 x FUZE Field personnel, day/night shifts
  • Immediate mobilisation
  • Operating within 2 days
  • Design conditions completed once live

Outcome

  • The engineering was completed while mobilisation occurred and the repair met ISO 24817 and ASME PCC-2 code compliance, including the supporting adhesion test data for HDPE

Share: